Introduction; Inspection; Description; Operation - Martindale Electric BZ701 Instruction Manual

Socket tester

Table of Contents

Cautions

Avoid severe mechanical shock or vibration and extreme

temperature.

2. INTRODUCTION

Examine the shipping carton for any sign of damage. Inspect the

unit and any accessories for damage. If there is any damage,

consult your distributor immediately.

The BZ701 is a socket tester that also indicates if the mains voltage

is below 195V or above 270V or if the neutral to earth voltage is

greater than 30V using LEDs and a buzzer.

The BZ701 safely detects Line-Neutral reversal (cross polarity) at

the incoming supply. The polarity swap test detects a serious fault

condition that cannot be identified by normal socket testers on

PME/TN-C-S systems, the most common type of supply. It is easily

activated by using the touch pad.

Correct polarity is indicated by three flashing green LEDs. A fault

condition is clearly indicated by 3 red LEDs and a warning buzzer.

The BZ701 uses a row of LED's to indicate wiring condition and

mains voltage level.

Note: The level of the mains supply is only indicated if the wiring

is correct.

Table of Contents