Introduction; Inspection; Description; Accessories - Martindale Electric VT25 Instruction Manual

2. INTRODUCTION

2.1 Inspection

Examine the shipping carton for any
sign of damage. Inspect the unit and any
accessories for damage. If there is any
damage then consult your distributor
immediately.

2.2 Description

The VT25 and VT28 are voltage testers
used for proving circuits are dead i.e. not
hazardous live. They are constructed in
accordance with the latest safety standards.
The voltage testers have the following
features:
AC and DC Voltage testing up to 690V
u
LCD indication of AC and DC voltage
u
(VT28 only)
Continuity test with optical and
u
acoustical indication up to 500kΩ
Single pole phase test
u
Phase rotation test
u
Auto-power On/Off
u
Automatic AC/DC detection
u
Bright LED indication
u
Indication of voltage above the ELV level
u
when batteries flat
Ergonomic and robust housing
u
Probe-tip protection
u
Torch
u
Complies with BS EN 61243-3:2014
u
Complies with GS38 when probe tip
u
covers are fitted
Measurement Category CAT IV 600V,
u
CAT III 1000V

2.3 Accessories

Probe tip covers (fitted)
u
2 x 1.5V AAA alkaline batteries
u
Instructions
u
2.4 Battery Installation
Refer to Section 4.1 (Battery Replacement)
for battery installation instructions.
5