Introduction; Inspection; Description - Martindale Electric PD240 Instruction Manual

1. INTRODUCTION

1.1 Inspection

Examine the shipping carton for any sign of damage. Inspect the unit and
any accessories for damage. If there is any damage then consult your
distributor immediately.

1.2 Description

To install or replace the battery refer to section 3.1.
The PD240 is a convenient pocket-sized, battery powered proving unit that
produces a 240VDC output.
Any device used for voltage detection and for proving dead should be tested
before and after use to ensure the safety of the operative.
The PD240 is current limited to 2mA and is suitable for use with multimeters
and other voltage detectors that have an input impedance greater than
120kΩ.
The unit is actuated by microswitch when probes of a voltage detector are
inserted into the probe apertures on front face.
1