Drive System Maintenance; Checking The Tire Pressure; Checking The Torque Of The Wheel Nuts - Toro LT2240 Operator's Manual

Figure 72
1. 50A (Main power)
2. 40A (ECU)
3. 50A (Glow plugs)
4. Empty
5. 15A (12V aux power)
6. 10A (Hazard
lights—optional)
6. Install the fuse-block cover
7. Close and latch the hood.
7. 10A
(Headlights—optional)
8. 10A (Air-ride
seat—optional)
9. 10A (Beacon—optional)
10. 10A (System
power—optional)
11. 10A (Horn)
(Figure 71).
Drive System
Maintenance

Checking the Tire Pressure

Check the air pressure in the front and rear tires.
Refer to the following chart for the correct pressure.
Important:
Maintain correct tire pressure in all
tires to ensure correct contact with the turf.
Tires Tire
Type
g351786
Front 23 x
Axle 10.5
- 12
BKT turf
pattern
Rear 18 x
Axle 9.5 - 8
BKT turf
pattern
Checking the Torque of the
Wheel Nuts
Service Interval: After the first hour
After the first 10 hours
Every 50 hours
Torque the wheel nuts in a crossing pattern to the
following values:
Front wheels: 200 N∙m (148 ft-lb)
Rear wheels: 100 N∙m (74 ft-lb)
WARNING
Failure to maintain proper torque of the wheel
nuts could result in personal injury.
Ensure that the wheel nuts are torqued
properly.
46
Recommended Tire Pressures
General Turf Road
Usage Conditions Conditions
1 bar 0.7 bar 1.4 bar
(14.5 (10 psi) (20 psi)
psi)
1 bar 0.7 bar 1.4 bar
(14.5 (10 psi) (20 psi)
psi)
Maximum
Pressure
1.7 bar
(25 psi)
1.7 bar
(25 psi)