Toro LT2240 Operator's Manual page 10

1. Horn button
Throttle Control
•
To increase the engine speed, move the
throttle-control lever
•
To decrease engine speed, move the
throttle-control lever rearward.
Note:
Engine speed influences the speed of the
other functions, i.e. ground speed, reel speed and
cutting unit lift rate.
1. Throttle control lever
Auto Reverse Limited-Lift Switch
The auto reverse limited-lift switch controls whether
cutting units can rise automatically to the limited lift
position when driving the machine backward.
•
To enable auto reverse-limited lift, press the top of
the auto reverse limited-lift switch
The LED light in the switch illuminates when
limited lift in reverse is enabled.
•
To shut off auto reverse-limited lift, press the
bottom of the auto reverse limited-lift switch.
Figure 5
(Figure 6) forward.
Figure 6
(Figure
g348129
1. Auto reverse limited-lift switch
Ignition Key
CAUTION
If you leave the key in the ignition switch,
someone could accidently start the engine
and seriously injure you or bystanders.
Remove the key from the ignition.
The ignition switch has 4 positions to control the
g348130
engine and machine electrical power.
7).
1. S
TOP
2. S
TART
10
Figure 7
Figure 8
3. P
REHEAT
4. R /A O
UN UXILIARY
g348147
g348086
N