Toro LT2240 Operator's Manual page 49

Figure 77
3. Unlatch and open the hood
4. Clean the inside of the hood screens with
compressed air (Figure
5. Thoroughly clean all debris out of the engine
area.
6. Clean the oil cooler with low-pressure (50 psi)
compressed air (Figure
g348598
(Figure 77).
77).
78).
1. Oil-cooler latches
7. Rotate the oil cooler latches inward, and pivot
the oil cooler (Figure 78
1. Radiator
8. Working from the fan side of the radiator ,
blow out debris with low-pressure (50 psi)
compressed air
at the front of the radiator, and again from the
fan side. Thoroughly clean both sides of the
oil cooler.
Important:
Do not use water to clean the
radiator and oil cooler.
9. Clean out any debris that may have collected on
other parts of the machine with compressed air.
10. Pivot the oil cooler up and secure it with the
latches.
11. Close and latch the hood.
49
Figure 78
and Figure 79).
Figure 79
(Figure 79). Repeat this step
g348599
g348600