Extended Engine Maintenance - Toro LT2240 Operator's Manual

Figure 66
1. Oil pan (engine)
2. Gasket
4. When all the oil is drained, install the drain plug.
5. Remove the oil filter
Figure 67
1. Oil filter (engine)
6. Apply a light coat of clean oil to the oil filter
gasket.
7. Thread the oil filter onto the oil filter-adapter until
it contacts the mounting surface, and tighten the
filter an additional turn.
Important:
Do not overtighten the filter.
8. Add oil to the crankcase; refer to
(page 41) and Checking the Engine-Oil Level
(page 41).
9. Close and latch the hood.
3. Drain plug (engine oil)
(Figure 67).
2. Adapter (oil filter)
Oil Specification
Extended Engine
Maintenance
Service Interval: After the first 50 hours—Check the
Every 400 hours—Check the engine speed (idle
and full throttle).
g348419
g348422
42
engine speed (idle and full throttle).