Toro LT2240 Operator's Manual page 7

134-4539
1. Falling, crushing hazard—ensure that the operator-platform
latch is engaged before operating.
1. Eight-hour interval
2. Read the Operator's Manual.
3. Grease every 8 hours.
4. Grease every 50 hours.
5. Check the tire pressure.
6. Check all bolts and nuts for proper
tightness.
1. Warning—shut off the engine and remove the key before
decal134-4539
1. Warning—read the
2. Thrown object
134-5121
7. Check all hoses for leaks.
8. Check the hydraulic-fluid level.
9. Check the fuel level.
10. Check the engine-oil level.
11. Check the operator seat switch.
12. Check the air filter element.
7
134-5122
releasing or operating the safety latches.
134-5139
Operator's Manual; wear
hearing protection; remove
the key before performing
maintenance.
hazard—keep bystanders
away.
13. Check the cutting unit.
14. Check engine-coolant level.
15. Clean the radiator.
16. 50-hour interval
17. Clean and inspect the machine.
18. Check the wheel nut tightness using a
torque wrench.
decal134-5122
decal134-5139
3. Tipping hazard—lower
attachments when
operating on hills/slopes;
do not turn sharply while
traveling fast; drive slowly
when turning.
decal134-5121