Configuring/Address Space; Configuring - Siemens SIMATIC ET 200SP Manual

Configuring/address space

4.1

Configuring

Introduction
The technology module is configured and assigned parameters with the configuration
software.
The technology module functions are controlled and monitored by the user program.
System environment
The technology module can be used in the following system environments:
Applications
Distributed operation in an
S7-1500 system
26
Components required
S7-1500 automation
•
system
ET 200SP distributed I/O
•
system
TM PosInput 1
•
Configuration software
STEP 7 (TIA Portal):
Device configuration with
•
hardware configuration
(HWCN)
Parameter setting with
•
High_Speed_Counter
technology object
STEP 7 (TIA Portal):
Device configuration with
hardware configuration
(HWCN) in operating mode
"Position Detection for
Motion Control"
Technology module TM PosInput 1 (6ES7138-6BA00-0BA0)
In the user program
Position input with SSI
absolute encoder:
Direct access to the control
and feedback interface
(Page 37) of the
TM PosInput 1 in the I/O
data
Counting and measuring
functions:
High_Speed_Counter
instruction for the technology
object
Control by means of a
technology object
Manual, 02/2014, A5E33015755-AA
4