Switching The Outputs At Comparison Values - Siemens SIMATIC ET 200SP Manual

2.2.3

Switching the outputs at comparison values

You define two comparison values that can control the two digital outputs independent of the
user program. The comparison values are configurable and can be modified during runtime
with the user program.
Comparison values in the Counting mode
Depending on the encoder, you define two position or counter values as comparison values
in the Counting mode. If the current position or counter value meets the configured
comparison condition, the corresponding digital output can be set to directly initiate control
processes in the process.
Comparison values in the Measuring mode
You define two comparison values in the Measuring mode. If the current measured value
meets the configured comparison condition, the corresponding digital output can be set to
directly initiate control processes in the process.
Technology module TM PosInput 1 (6ES7138-6BA00-0BA0)
Manual, 02/2014, A5E33015755-AA
Product overview
2.2 Functions
15