There are some necessary maintenances for WaxJet® 400/410 series regularly.
Note: For routine maintenance, the printer must be on standby and a clean build plate must be installed.
Note: Maintenance tasks must be performed regularly to ensure good operation of the equipment and the accuracy of printed
objects.
Maintenance task
Clean top fans filter
Clean the primary efficient filter
Replace the primary efficient filter
Clean the waste box
Daub oil for X-axis guide
Daub oil for Y-axis guide and the motor
screw rod
Daub oil for Z-axis guide and the motor
screw rod
Clean the X-axis base
Clean internal dust
Clean dust around the sensors
Clean the outer surface
Clean build chamber
Clean build plate
Clean the touchscreen
Clean MDM
Clean the carriage of printhead
Clean the bottom side of Y-beam
Powder Removal for Pipes
Clean the blade at HMS
Clean the planarizer and its blade
The recommended operating environment recommends
Recommended temperature range: 18-24 degrees C (64-75 degrees F)
Chapter 8 Maintenance
Maintain the schedule
As needed
√
√
operating temperature range: 18-28 degrees C (64-82 degrees F)
36
Every day
Every week
√
√
√
√
√
√
√
√
√
√
√
√
√
Recommended humidity range:30%-70%
Every month
Every half year
√
√
√
√
√