Features; Applications; Term - Flashforge Waxjet 400 User Manual

WaxJet® 400/410 Series 3D printers use multi-jet print technology, print high-precision wax patterns with big, printing build size. It
can print many parts with flat and vertical build simultaneously.Each layer thickness is 0.016mm. With superior surface quality, fine
details and superior precision, fast workflows, high-volume customization, and increased casting efficiency and productivity. The
patterns can be used directly investment casting with high efficiency.
It is suitable for precision investment casting, such as precision manufacturing, jewelry, watches, aviation fields and so on.
Material
The mass per unit volume of materials in a
density specific volume state.
There are two materials (support material and
part material)) to print a three-dimensional solid
model. Support material is a kind of wax, which
3D printing
adhere the model to the build plate and used to
technology
support the hanging part model. The part
material is also a kind of wax. Models are
connected to the build plate via support material
after modelling.
Detachable platform for model building. Use the
supporting material to paste the part and the
Build plate
build plate, and it will be removed from the
printer after printing.
The precision of the image, WaxJet® 400/410 uses
Resolution
the unit of DPI to describe.
Uncured support and/or part materials
Waste produced during the modeling process. When
material
disposing of any waste, it must wear nitrile
gloves, lab coats and protective goggles.
The final process: to clean the support materials
Post-
in the surface of the model, thus making the
processing
finished model more smooth before polish and
decoration.
It is a kind of modeling wax. You must wear
nitrile gloves, lab coats and protective glasses
part wax
when handling any material. The materials are
provided to the printhead through umbilical as
needed.
HMS
It is used to maintain the printhead.
The temperature at which the solid state and
Melting
liquid state of the materials are in equilibrium
point
under a certain pressure.
The temperature of material softens, which refers
Softening
to the temperature at which the amorphous
Point
polymer starts to soften.

2.3 Features

2.4 Applications

2.5 Terms
Investment
casting
Log
Shrink rate
WaxJetPrint
Micro Piezo
Nozzle
X-axis
Y-axis
Z-axis
Support
wax
User
interface
(UI)
.stl file
10
A casting process via soluble and disposable
materials; an industrial process based on
lost-wax casting.
The log file is a compressed file that contains the
log used by the support service. The log file will
be used to solve potential problems that may
produced with the 3D printer system.
It is used to adjust the expected shrinkage during
the printing process, so that the size of the
produced model can be closer to the actual size.
Software client, which slicing the stl file and send
data to 3D printer.
An industrial ink-jet nozzle to ensure the smooth
output of liquid from the designated hole.
The left to right direction on build plate.
The front to back direction on build plate.
The top-down direction on build plate.
A material for wax base: to connect the model
with the build plate, to support the suspended
structure and hollow structure.
The user interface is located on the left side of the
printer. Use UI to control or check a variety of
functions, such as print job status, printer
materials, printer shutdown, etc. You can also
check some settings in the printer.
A file, created by 3D solid computer-aided design
(CAD) software, which is used to produce parts.