Maintenance; Maintenance Screen; Extruder Maintenance - Flashforge EN-A01 User Manual

ATTENTION
Users can click the [
the currently encountered problems.
Camera About
ATTENTION
6.2.1 Nozzle Replacement
The replacement method can be viewed by clicking the [How to change the extruder?]
on the maintenance screen. Please operate following the instructions on the screen.

6. Maintenance

As the firmware will be upgraded from time to time, please
refer to the actual display screens. The following is only a
brief introduction of functions.

6.1 Maintenance Screen

] - [Maintain] to query
Status Maintain
2/2

6.2 Extruder Maintenance

When operating the extruder, the power supply must be
disconnected.
< Maintain
How to change the extruder?
1. Please loosen the fixing screws as shown in the
figure and remove the nozzle assembly.
2. Install the new nozzle assembly.
< Maintain
Upgrade
< Maintain
Screw
19
Copy Logs
How to change the extruder?
How to replace the flexible steel plate platform?
1/2
How to Install a Glass Platform？
Clean the clogged nozzle
Routine Maintain
2/2
>
>
>
>
>
>