Chattanooga Group Intelect TRANSPORT Vectra Genisys 2782 Service Manual page 9

3 NOMENCLATURE
3.2 HARDWARE AND SOFTWARE SYMBOL DEFINITIONS CONTINUED
Ultrasound Applicator Connection
This port serves as the connection point between the unit and the Ultrasound Applicator.
START
Select Start to begin a treatment session.
Accept and Return
Select to accept menu selection and to return to the home screen
INTENSITY
Use the up or down arrow on the Intensity button to adjust Ultrasound Intensity to the
prescribed level.
Duty Cycle
Press to select and display the Duty Cycle of the Ultrasound as prescribed. Options available are: 10%,
20%, 50,% or Continuous (100%).
Up Arrow
When the window displays a list of options, press the Up Arrow button to scroll up the list.
Battery Indicator
When displayed on the LCD, this symbol indicates the Battery pack option is present on the unit. This
symbol also displays the charge status of the Battery.
LCD Intensity/Contrast Dial
If the intensity of the LCD display diminishes, turn the dial until the Display contrast is optimal.
Charge Indicator
This symbol displays when the unit is connected to Mains Power and the Battery Pack is charging.
Frequency
Press to change Frequency to 3 MHz or 1 MHz.
Intensity Display
Press to display "Watts" or "Watts per cm²" for the output of the ultrasound.
Head Warming
Press to turn Off or On the Head Warming feature of the system.
Increase
Found in two locations on the system, press to increase session time and/or ultrasound intensity
respectively.
Decrease
Found in two locations on the system, press to decrease session time and/or ultrasound
intensity respectively.
NOTE: During Battery operation, if the unit is left on, but is not active for more than five minutes, it
will power off to conserve Battery power. To restore power, press the Power On/Off button.
Intelect TranSport ® /Vectra Genisys ® Ultrasound Therapy Systems
7