AJAX MotionProtect User Manual page 9

MotionProtect / MotionProtect Plus User Manual | Ajax Systems Support
1. Devices
2. MotionProtect |
3. Settings
First Celd
Room
Delay When Entering, sec
Delay When Leaving, sec
Delays in night mode
Arm in night mode
Alarm LED indication
https://support.ajax.systems/en/manuals/motionprotect/?_ga=2.95014106.754703337.1648293156-504169808.1647685641
MotionProtect Plus
Setting Value
Detector name, can be edited
Selecting the virtual room to which the
device is assigned
Selecting delay time when entering
Selecting delay time on exit
Delay turned on when using night mode
If active, the detector will switch to
armed mode when using night mode
Allows you to disable the Zashing of the
LED indicator during an alarm. Available
for devices with Crmware version
5.55.0.0 or higher
How to Gnd the Grmware
version or the ID of the
detector or device?
Choosing the sensitivity level of the
motion sensor.
For MotionProtect:
High — for premises with a minimum
amount of obstacles, motion is
detected as quickly as possible
Medium — for premises with
26.03.2022 12.55
Side 9 af 22