Table of Contents
Advertisement
7.5 Mounting the rear cover
Required tools
Allen wrench 4 mm
How to mount
1.
Place the cover over the cover hook on the bottom of the projector frame (reference 1), while making sure
it fits next to the frame bar.
2.
Place the topside of the cover near the cover hooks on the top of the rear frame (reference 2).
3.
Slide the clips in the rear cover over the cover hooks.
Image 7–7 Sliding in the rear cover
4.
Move the locking bracket (reference 3) to the position of the holes in the frame bar (reference 4).
Image 7–8 Positioning the safety bracket
5.
Lock the safety bracket in its place. Use a 4 mm Allen wrench to drive in the two screws.
2
1
Projector covers
R5914481 /02 XDX
75
Advertisement
Table of Contents
