Barco XDX Series Installation Manual page 60

Input & communication
LEDs and inputs on the ICP-D
Image 5–3
1 HDMI Input A
2 HDMI Input B
3 Reset button
For the specifications on the HDMI ports, please refer to the appendices of the ICP-D installation manual.
ICP-D LEDs
Status overview PWR/ERROR and READY LEDs:
PWR/ERROR
Off
Red
Blinking Green
Blinking Green
Blinking Green
Blinking Green
Green
Green
Green
Blinking Red
Green
Orange
When installing a new ICP board in a XDX projector the Spatial Color Calibration file must be
reloaded and activated.
CAUTION: Make sure not to short circuit the battery on the board. That will destroy the board
completely !
60 R5914481 /02 XDX
READY ICP-D Status
Off Turned off
Off Board reset or security error
Off Boot loader
Blinking Orange Operating System start up
Orange Security Manager - Image Integrity tests
Blinking Yellow Security Manager - Self Test
Blinking Green Starting Applications
Green Applications started in normal mode
Orange Applications started in degraded mode
Off Security error
Blinking Orange Update ongoing
Orange Update done
1 2 3 4
4 Ready LED
5 Power & Error LED
5