Table of Contents
Advertisement
2.
Place the 4 vertical fences on the base of the reinforcement frame as illustrated. Secure with 2 bolts
G186470, 2 washers V3673826 and 2 nuts B364326 as illustrated.
Image 3–6
3.
Lift up the projector and turn out the 4 feet. These feet will be reused to mount the projector in its frame.
Use an adjustable wrench to loosen these feet.
4.
While the projector is lift up, slide the frame under the projector, lift it against the bottom of the projector
and turn in the 4 removed feet to secure the frame to the projector. Use an adjustable wrench to tighten
the feet.
Image 3–7
Installation preparations
R5914481 /02 XDX
29
Advertisement
Table of Contents
