Pressing help repeatedly...
•
Displays help about the selected menu item
•
Displays status screen
•
Displays help about the status screen
•
Displays status screen etc.
As illustrated below:
Menu
Screen
Using The Menu System
Menu screens appear on the LCD when either the <VOL>, <UTIL>, <DIAL>,
<AUTODIAL>, or <DROP> buttons are pushed.
For instance, the <VOL> button causes the Volume screen to be displayed:
Headphones
Phone Speaker
Send
In this menu, you can adjust the headphone volume, the small front panel "phone
speaker" volume, and the send audio level.
The settings in this screen are immediately affected by pressing the <NO - > and <YES
+> buttons.
When the screen first appears, Headphones is selected. This is indicated by the
brackets being at either side of the value 1 for headphone level. The <SEL> buttons
select the parameter to be changed, and the brackets move to surround the selected
value/mode. As you would expect, the movement happens in the direction of the arrow
on the button.
Let's say we want to adjust the send level. Press the <SEL •> button twice to position
the brackets around the send value:
60
Section 4
<Help>
Help for
<Help>
Menu Screen
[
1 ]
0
+4 dBu
<+/-> change
INSTALLATION & BASIC OPERATION
<Help>
Status
Status
Screen
Help
<Help>
SE L
-
SE L
N O
UT IL
V O L
+
YE S
H EL P