Faxable Isdn Bri Line Order Form - Telos Zephyr User Manual

FAXABLE ISDN BRI LINE ORDER FORM

To: Telephone Company
Attention:
From:
Company:
Address:
City/State/ZIP:
Phone:
Contact:
Long distance carrier:
Date needed:
We request an ISDN Basic Rate Interface (BRI) line for use with
the Zephyr hi-fidelity audio codec. This device is used to
transmit audio using digital telephone services. It requires
Circuit Switched Data (CSD). The Zephyr transmits audio in real
time and therefore needs reliable constant bit rate (CBR) service.
It can also make standard POTS voice calls using Circuit Switched
Voice (CSV) service. Please advise us if there is a cost penalty
for having both CSD and CSV. 10XXX long distance option must be
set to " Yes" . Clear channel 64kbps access should be provided. If
only 56kbps is available, this is acceptable, but please notify
us.
If you use IOC Capability Packages, please use Capability Package
" S" . If you do not use IOCs, use the information on the pages
that follow.
Zephyr has an integral BRI terminal adapter which supports these
protocols:
•
AT&T 5ESS: Custom Point- to- Point (5E4.2 or later), National ISDN- 1
•
Northern Telecom: Functional (PVC1), National ISDN- 1 (PVC2)
•
Siemens EWSD: National ISDN- 1
We can use any of the protocols given above. Please let us know
which protocol you will provide and the switch type. We will
provide the NT1 and need a U interface with 2B1Q line coding on an
254
Section 15 APPENDICES
Location for line:
Company:
Address:
City/State/ZIP:
Phone:
Contact: