Telos Zephyr User Manual page 71

Status Screen During A Call
When the connection is made, the status screen will appear, and a timer will begin for
each line to show the call duration.
Then, after a call is connected, the status word becomes a call timer.
The colon blinks every second to indicate that the unit is operating, as a "peace- of-
mind" indicator.
0:02|Xmt:L3 Stereo
0:01|56 kbps 32kHz
Solving ISDN Problems
If you don't get the Ready indications, the SPIDs are the most probable problem. We
have had a number of experiences where Telco people have given incorrect SPIDs to
users. For additional information refer to manual section 10 (Advanced
Troubleshooting), section 5 (ISDN) and section 4 (installation & Basic Operation)
To aid troubleshooting, here is the meaning of each step:
inact:
init:
wait:
Ready:
ConnW:
ConnP:
ConnR:
0:00
Disc:
BASIC OP
XX:XX: Time in HR:MN format.
|Rcv:L3 Mono
|ISDN
No line connected, or connected to wrong jack on Zephyr
Before sending SPID to ISDN network, or after seeing external NT1
SPID has been sent to network
SPID has been accepted and everything is OK
Outgoing call in progress; waiting for line.
Outgoing call in progress; call proceeding
Outgoing call ringing
Call connected
Call disconnected
Section 4 INSTALLATION &
71