Telos Zephyr User Manual page 255

a standard, six-pin/4-conductor RJ-11-style modular jack, of which
only the center two conductors will be used.
You may call the manufacturer of the Zephyr, Telos Systems, at
+1 216.241.7225 for any additional required information. Ask for
" ISDN Customer Support."
PROTOCOL: AT&T Point-to-Point (Custom)
Software version 5E4.2 and above
CO Values:
Line Type (DSL class): Point-to-Point (PTP)
B1 Service: On Demand (DMD)
B2 Service: On Demand (DMD)
Maximum B Channels (MaxChan): 2
CSV Channels: Any
Number of CSV calls: 1
CSD Channels: Any
Number of CSD calls: 2
Terminal Type: A
Number Display: No
Call Appearance Pref:Idle
10XXX Long Distance Prefix: Yes
Turn off features such as: packet mode data, multiline hunt,
multiple call appearances, Electronic Key Telephone Sets (EKTS),
shared directory numbers, accept special type of number, intercom
groups, network resource selector (modem pools), message waiting,
hunting, interLata competition, etc.
Give us:
1) One Directory Number
PROTOCOL: AT&T Point-to-Multipoint (Custom)
Not supported by the Zephyr
Please provide National ISDN 1 or AT&T Point-to-Point (Custom)
Section 15 APPENDICES
255