Names And Functions Of Parts; Main Unit - Kenwood VR-9070 Instruction Manual

Names and functions of parts

Main unit

Speaker
indicators
*
Input channel indicators
Input channel indicators
light up according to the
incoming audio signals.
"S" indicator will light up
when the surround
component of the audio
*
Input channel indicators
signals is only 1 channel.
Output channel indicators
The figure is the view when the front cover is open
A SPEAKERS B
PHONES
1
(POWER ON/STANDBY) key
Use to turn the power ON/STANDBY.
Standby indicator
2 SPEAKERS A/B keys
Use to turn the A/B speakers on or off.
3 Surround LED (light-emitting diode)
indicators
THX indicator
Lights when the THX mode has been chosen.
THX mode may or may not be activated
depending upon the applicable playback
mode.
96kHz fs indicator
Lights when the receiver is in the 96kHz
LPCM playback mode.
ACTIVE EQ indicator
Lights when the receiver is in the ACTIVE EQ
mode.
DOLBY DIGITAL indicator
Lights when the receiver is in the Dolby
Digital mode.
DTS indicator
Lights when the receiver is in the DTS mode.
DSP indicator
Lights when the receiver is in the DSP mode.
Standby mode
While the standby indicator is lit, a small amount of power is supplied to the system to back up the memory. This is called standby mode. Under the condition,
the system can be turned ON by remote control unit.
6 EN
MUTE CLIP Input mode
indicator indicator indicators
SP MUTE
AUTO DETECT
A B
CLIP
L C SW R
LFE
SL S SB SR
THX DOLBY DIGITAL
96kHz fs DTS
ACTIVE EQ DSP
THX DOLBY VIRTUAL STEREO INPUT MODE
BASS BOOST DSP ACTIVE EQ DIMMER
4 INPUT SELECTOR key
)
Use to select input sources.
5 VOLUME CONTROL knob
6 PHONES jack
£
Use for headphone listening.
7 THX key
Use to switch the status of THX.
›
DOLBY VIRTUAL key
Use to select the Dolby Virtual Speaker and
the Dolby Headphone setting.
STEREO key
Use to switch the listen mode to STEREO.
‡
INPUT MODE key
Use to select the Input mode.
BASS BOOST key
§
Use to select BASS BOOST setting.
DSP key
Use to select any of the DSP mode.
‹
ACTIVE EQ key
Use to select ACTIVE EQ setting.
DIMMER key
‹
Use to select the REC MODE.
Use to adjust the brightness of the display.
›
Listen mode indicators
SLEEP indicator
DIGITAL DOLBY DIGITAL EX DTS 96/24 DOLBY H
DOLBY EX ES MATRIX6.1 DOLBY VS
6CH INPUT DOLBY PL II x ES DISCRETE6.1
Display
.
SOUND TONE SETUP
MULTI CONTROL
BAND AUTO/MONO MEMORY
8£
STEREO NEO:6 THX
96kHzfs Surround EX
LOUDNESS SLEEP DSP MODE
AUTO
MEMORY
STEREO
TUNED
Frequency display
Input display
Preset channel display
Surround mode display
VOLUME CONTROL
INPUT
SELECTOR
AV AUX/GAME
LISTEN MODE
S VIDEO
8 SOUND key
£
Use to adjust the sound quality and the
¢
ambience effects.
§
TONE key
Use to switch the status of TONE control.
‹
SETUP key
Use to select the speakers' settings etc.
fi
BAND key
Use to select the broadcast band.
AUTO/MONO key
‹
Use to select the auto or manual tuning
mode.
MEMORY key
Use to store radio stations in the preset
¢
memory.
9 5/∞ keys
‹
Use for selection adjustments during sound,
setup and preset channel functions.
0 MULTI CONTROL knob
¢
Use to control a variety of settings.
! LISTEN MODE knob
¶
Use to select the listening mode.
@ AV AUX/GAME key
fl
Use to switch the input to AV AUX or GAME.
# AV AUX (S VIDEO, VIDEO, L-AUDIO-R)
jacks
AUTO indicator
MEMORY indicator
STEREO indicator
TUNED indicator
VIDEO L-AUDIO-R
)fl
¢
)
•
•
•
)
‹
(£
(