VR/KRF-V SERIES (En/KM)
For VR-aOS, VR-306, VR-355,
and KRF-V5020
r— sp^
Frequency display,
Input display.
Preset channel display.
Surround mode display
Speaker indicator
MUTE indicator
S.DIRECT indicator
AUTO indicator
MEMO, indicator
ST. indicator
I
Speaker selection indicators
Output channel indicators
TUNED indicator
MONITOR indicator
DSP indicator
3 STEREO indicator
STEREO indicator
IP P
For KRF-V6020
O
POWER kay
(For U.S^. and Canada)
Use to turn the power ON/OFF.
STANDBY indicator
O
ON/STANDBY (■/(!]) kay
(Except for U.S.A. and Canada)
Use to switch the power ON/STANDBY
when the POWER is turned ON.
STANDBY indicator
B
POWER kay
(Except for U.S.A. and Canada)
O DiMMER kay
Use to adjust the brightness of the display.
O P.CALLkays
Use to call up previously registered radio
stations.
0 BAND kay
Use to select the broadcast band.
0 AUTO kay
Use to select the auto tuning mode.
0 MEMORY kay
*02
Use to store radio stations in the preset
merT>ory.
O VOLUME CONTROL knob
0 PHONES lack
Use for headphone listening.
0 SPEAKERS A kay (KRF-602Q)
Use to turn speaker system A on and off.
SPEAKERSkay
(VR-305, VR-306, VR-355, and
KRF-V5020)
Use to turn the speakers on and off.
0 SPEAKERS B kay (KRF-6020)
-□£
Use to turn speaker system B on and off.
MUTE kay
(VR*305, VR-306t VR-3S6, and
KRF-V5020)
-Q£
Use to temporarily mute the sound.
0 BASS BOOST kay
Use to select the maximum adjustment
setting for the low frequency range.
0 VIDEO 2/MONrrOR kay
*08
0 SOURCE DIRECT kay
-08
• LISTEN MODE k^y
-OS
Use to select the listening mode.
0 SOUND kay
Use to adjust the sound quality and ambi-
enceeffects.
0 SETUP kay
-08
Use to select the surround sound settings.
0 MULTI CONTROL knob
Used to make a variety of settings.
0 INPUT SELECTOR knob
-Q8
Use to select the input sources.
About tho STANDBY Indicator
This unit has a STANDBY indicator. When the STANDBY indicator is lit, the unit consumes a small amount of power to preserve the memory. This is called
STANDBY mode. This mode also lets you turn the power ON using the remote control.