Kenwood VR-9070 Instruction Manual page 22

Preparing for surround sound
7
Adjust the bass peak level.
A restriction is put on the low frequency so that the bass peak level
will not go higher than the acceptable level when the volume is
increased.
If Subwoofer is OFF, the limitation will affect the low frequency of
the Front Left and Right Speakers.
1 Press the 5/∞ keys or MULTI @ / # keys to select BASS PEAK
and press the SETUP key.
SP MUTE
A B CLIP
L R
LFE
2 Use the MULTI CONTROL knob or MULTI %/fi keys to adjust
the bass peak level to –30dB.
• The adjustment range is from – 30dB to 0dB and OFF.
3 For optimum bass peak level, keep increasing the bass peak
level by using the MULTI CONTROL knob or MULTI %/fi keys
while test tone is being output until clip sound is heard from
the Subwoofer or Front Speaker.
SP MUTE
A B CLIP
SW
LFE
4 Press the SETUP key to accept the setting.
8
Input the distance to the speakers.
• Indicators appear only for the channels of the speakers selected
in step 4.
1 Press the 5/∞ keys or MULTI @/# keys to select the SP
DISTANCE on setup displays and press the SETUP key again.
2 Measure the distance from the listening position to each of
the speakers.
Jot down the distance to each of the speakers.
Distance to Front Left Speaker (L) : ____ feet (meters)
Distance to Center Speaker (C)
Distance to Front Right Speaker (R) : ____ feet (meters)
Distance to Surround Right Speaker (SR)
Distance to Surround Back Right Speaker(SBR)
Distance to Surround Back Speaker(SB)
Distance to Surround Back Left Speaker (SBL)
Distance to Surround Left Speaker (SL)
Distance to Subwoofer (SW)
• If you have selected "SB NML/THXx1" or "SB LARGEx1",
"SBR" and "SBL" are not appeared but "SB" is appeared on the
Display.
3 Use the 5/∞ keys or MULTI @/# keys to select the speakers
and the MULTI CONTROL knob or MULTI %/fi keys to adjust
the distance to the Front Speakers.
The speaker indicator to be adjusted blinks.
SP MUTE
A B CLIP
L C SW R
LFE
SL S SB SR
• The allowable setting range is 1 to 30 feet (0.3 to 9.0 m),
adjustable in 1 foot (0.3 m) increments.
22 EN
STEREO
: ____ feet (meters)
: ____ feet (meters)
: ____ feet (meters)
: ____ feet (meters)
: ____ feet (meters)
: ____ feet (meters)
: ____ feet (meters)
STEREO
Indication in feet Indication in meters
4 Repeat steps 3 to input the distance for each of the speakers.
5 Press the SETUP key again to return to main setup displays.
• The speakers you have selected should appear on the display.
Confirm that all the speakers have been correctly selected.
9
Adjust the LFE LEVEL (Low Frequency Effects).
1 Press the 5/∞ keys or MULTI @/# keys to select the LFE
LEVEL and press the SETUP key.
2 Use the MULTI CONTROL knob or MULTI %/fi keys to adjust
the LFE LEVEL.
SP MUTE
A B CLIP
L R
• The LFE LEVEL can be adjusted from 0dB to -10dB in 1dB
decrements.
3 Press the SETUP key again to return to main setup displays.
0
Select the display mode.
1 Press the 5/∞ keys or MULTI @/# keys to select the DISP
MODE and press the SETUP key.
2 Use the MULTI CONTROL knob or MULTI %/fi keys to select
the display mode.
1 DISP SELECTOR
2 DISP LISTEN
SP MUTE
A B CLIP
L R
3 Press the SETUP key again to accept the setting.
4 Use the 5 key or MULTI # key to select EXIT.
SP MUTE
A B CLIP
L R
SL S SB SR
5 Press the SETUP key to exit the SETUP mode.
STEREO
: Displays the current input selector.
: Displays the current listen mode.
STEREO
STEREO