Download  Print this page

Kenwood VR-9070 Instruction Manual page 37

Kenwood instruction manual audio video surround receiver
Hide thumbs

Advertisement

Convenient functions
Dimension mode (Pro Logic II x Music and Pro Logic II Music
mode only)
When listening to music with certain recordings, you will also be able to
achieve a suitable balance from all the speakers by adjusting the
dimension mode.
1 Press the SOUND key, then press the 5 5 5 5 5 /∞ ∞ ∞ ∞ ∞ keys or MULTI @/#
keys until "DIMENSION" appears on the display.
2 Use the MULTI CONTROL knob or MULTI %/fi keys to adjust the
soundfield towards the rear or the front.
Soundfield is adjusted towards the front.
SP
MUTE
AUTO DETECT
A B
CLIP
L
R
LFE
Soundfield is in neutral position.
SP
MUTE
AUTO DETECT
A B
CLIP
L
R
LFE
S
SB
Soundfield is adjusted towards the rear.
SP
MUTE
AUTO DETECT
A B
CLIP
L
R
LFE
3 Press the SOUND key again to return to the input indication.
Center Width mode (Pro Logic II x Music and Pro Logic II
Music mode only)
Center width adjustment allows you to enjoy an enhanced sound when
listening to music through center image from only Center Speaker, or
Left and Right Speakers or various combinations adjustments.
1 Press the SOUND key, then press the 5 5 5 5 5 /∞ ∞ ∞ ∞ ∞ keys or MULTI @/#
keys until "CENTER WIDTH" appears on the display.
• The CENTER WIDTH indication scrolls across the display.
• When the center speaker is switched OFF, this mode will not be
effective.
2 Use the MULTI CONTROL knob or MULTI %/fi keys to adjust the
left-center-right output.
Center image will be heard from Center Speaker only.
SP
MUTE
AUTO DETECT
A B
CLIP
L
R
LFE
S
SB
Center image will be heard from Left and Right Speakers only.
SP
MUTE
AUTO DETECT
A B
CLIP
L
R
LFE
S
SB
• When in other position, center image from Center Speaker, Left and
Right Speakers can be heard simultaneously with various
combinations.
3 Press the SOUND key again to return to the input indication.
DOLBY PL II x
DOLBY PL II x
DOLBY PL II x
DOLBY PL II x
DOLBY PL II x
Center Image mode (Neo:6 Music mode only)
In the CENTER IMAGE setting mode of the Neo:6 MUSIC listen mode,
it is possible to enhance the center channel audio by adjusting the center
signal component.
1 Press the SOUND key, then press the 5 5 5 5 5 /∞ ∞ ∞ ∞ ∞ keys or MULTI @/#
keys until "CENTER IMAGE" appears on the display.
SP
MUTE
AUTO DETECT
A B
CLIP
L
R
• When the center speaker is switched OFF, this mode will not be
effective.
2 Use the MULTI CONTROL knob or MULTI %/fi keys to adjust the
left-center-right output.
SP
MUTE
AUTO DETECT
A B
CLIP
L
R
LFE
S
SB
• Adjust the center component level.
3 Press the SOUND key again to return to the input indication.
Dual Mono mode (Dolby Digital mode only)
When the Dolby Digital source have Multiplex sound, you can select
Main / Sub sound for Audio output.
1 Press the SOUND key, then press the 5 5 5 5 5 /∞ ∞ ∞ ∞ ∞ keys or MULTI @/#
keys until "DUAL MONO" appears on the display.
• This can be selected only if CD/DVD, DVD/6CH, VIDEO 2 or VIDEO
3 is selected as the source, and the Listen LISTEN mode is set to
"DOLBY DIGITAL".
2 Use the MULTI CONTROL knob or MULTI %/fi keys for the
following selection.
1 Main
: Multiplex Main channel output.
2 Sub
: Multiplex Sub channel output.
3 Main + Sub : Multiplex Main + Sub channel output.
4 Stereo
: Main channel from the left speaker. / Sub channel
from the right speaker.
SP
MUTE
DIGITAL
AUTO DETECT
A B
CLIP
LFE
• The adjustment item is displayed for approximately 20 seconds.
3 Press the SOUND key again to return to the input indication.
96kHz LPCM playback
The receiver is compatible with the 96kHz LPCM playback. To play a
96kHz DVD, set the listen mode other than DSP mode.
(96kHz fs indicator lights up)
• In FULL AUTO input mode and the listen mode is set to DSP mode, the
listen mode will automatically be STEREO.
• When in DIGITAL MANUAL input mode and the listen mode is set to
DSP mode, "96kHz LPCM" will appear in the display and no sound can
be heard from the speakers.
Use the LISTEN MODE knob, LISTEN MODE key or STEREO key to
select STEREO mode to output sound from the speakers.
STEREO
NEO:6
NEO:6
DOLBY DIGITAL
STEREO
37
EN

Advertisement

loading

  Related Manuals for Kenwood VR-9070