Names And Functions Of Parts; Main Unit - Kenwood KRF-V7070D Instruction Manual

Names and functions of parts

Main unit

Speaker
indicators
L
SL S
Speaker selection indicators
Input channel indicators
Output channel indicators
STANDBY
ON/STANDBY
A SPEAKERS B
POWER
-ON –OFF
PHONES
1 POWER ON/OFF key
Use to turn the main power on or off.
2 ON/STANDBY
key
Use to turn the power ON/STANDBY when
the POWER is turned on.
STANDBY indicator
3 A SPEAKERS B keys
Use to turn the A/B speakers on or off.
4 LOUDNESS key
Use to switch the status of LOUDNESS.
5 SPEAKER EQ key
Use to select SPEAKER EQ's setting.
6 Surround LED (lighting-emitting diode)
indicators
DSP mode LED indicator
Lights when the receiver is in the DSP mode.
SPEAKER EQ mode LED indicator
Lights when the receiver is in the SPEAKER
EQ mode.
ACTIVE EQ mode LED indicator
Lights when the receiver is in the ACTIVE EQ
mode.
DOLBY DIGITAL mode LED indicator
Lights when the receiver is in the Dolby
Digital mode.
DTS mode LED indicator
Lights when the receiver is in the DTS mode.
Standby mode
While the standby indicator is lit, a small amount of power is supplied to
the system to back up the memory. This is called standby mode. Under the
condition, the system can be turned ON by remote control unit.
6
EN
MUTE CLIP Input mode
indicator indicators
indicator
SP MUTE OPTICAL 6CH INPUT
AUTO DETECT
A B CLIP
COAXIAL ANALOG 96kHzfs
C SW R
LFE
SB SR
DSP DOLBY DIGITAL
SPEAKER EQ DTS
ACTIVE EQ CSII
LOUDNESS SPEAKER EQ ACTIVE EQ DSP STEREO INPUT MODE DIMMER
DVD/6CH CD/DVD PHONO TUNER
VIDEO 1 VIDEO 2 VIDEO 3 MD/TAPE
&
CS II mode LED indicator
Lights when the receiver is in the CIRCLE
SURROUND II mode.
&
7 ACTIVE EQ key
Use to select ACTIVE EQ's setting.
8 DSP key
Use to select any of the DSP mode.
)
9 STEREO key
Use to switch the listen mode to STEREO.
¡
0 INPUT MODE key
Use to switch between the full auto, digital
¡
and analog inputs.
! DIMMER key
Use to select the REC MODE.
⁄ Use to adjust the brightness of the display.
@ VOLUME CONTROL knob
™
# MUTE key
Use to temporarily mute the sound.
$ PHONES jack
¡
Use for headphone listening.
% Input Selector keys
DVD/6CH, CD/DVD, PHONO , TUNER,
VIDEO 1, VIDEO 2, VIDEO 3, MD/TAPE
⁄
Use to select input sources.
^ SOUND key
Use to adjust the sound quality and the
⁄
ambience effects.
Listen mode
indicators
DTS DOLBY DIGITAL STEREO
DSP MODE PRO LOGIC LOUDNESS
Frequency display
Input display
Display Preset channel display
Surround mode display
MULTI CONTROL
SOUND TONE SETUP
BAND AUTO MEMORY
⁄
¡
⁄
¤
8
£
›
)
¡
™
)
¤
Connection at POWER ON/OFF key
The power in this equipment will not be completely cut off from the AC
wall outlet when the main switch is turned OFF.
RDS indicators
RDS
AUTO indicator
PTY
CSII
MEMORY indicator
AUTO
MEMORY
STEREO indicator
STEREO
TUNED
TUNED indicator
VOLUME CONTROL
DOWN UP
MUTE
LISTEN MODE
AV AUX
S VIDEO VIDEO L-AUDIO-R
& BAND key
Use to select the broadcast band.
* AUTO key
Use to select the auto or manual tuning
mode.
( TONE key
Use to switch the status of TONE control.
) MEMORY key
Use to store radio stations in the preset
memory and to start the Auto Memory.
¡ SETUP key
Use to select the speakers' settings etc.
™
keys
Use for selection adjustments during sound,
setup and preset channel functions.
£ MULTI CONTROL knob
Use to control a variety of settings.
¢ LISTEN MODE knob
Use to select the listening mode.
∞ AV AUX (S VIDEO, VIDEO, L-AUDIO-R)
jacks
§ AV AUX key
Use to switch the input to AV AUX.
¢
¢
¡
∞
&
&
&
⁄
%
%