Convenient Functions; Adjusting The Sound - Kenwood VR-9070 Instruction Manual

Convenient functions

Adjusting the sound

You can make further adjustments to the sound while listening to
playback in the surround mode.
STEREO
DIMMER SOUND
MULTI %/ fi,
@/#
DIMMER
LISTEN MODE
%/ fi
1 For the remote control, press the RCV MODE key to switch to
receiver mode.
2 Press the SOUND key and then use the 5 5 5 5 5 /∞ ∞ ∞ ∞ ∞ keys or MULTI @/#
keys until the desired item appears in the display.
Each time you press the 5 5 5 5 5 /∞ ∞ ∞ ∞ ∞ keys or MULTI @/# keys, the menu
changes as follows:
Note that some items are not displayed in certain modes.
1 CNTR (Center Speaker level adjustment)*
2 SR (Right Surround Speaker level adjustment)*
3 SB (Surround Back Speaker level adjustment)*
4 SBR (Surround Back Right Speaker level adjustment)*
5 SBL (Surround Back Left Speaker level adjustment)*
6 SL (Left Surround Speaker level adjustment)*
7 SUBW (Subwoofer level adjustment)*
8 INPUT (Input level adjustment - analog mode only)
9 MIDNIGHT (Midnight mode ON/OFF - Dolby Digital and DTS mode
only)
0 PANORAMA (Panorama mode ON/OFF)**
- DIMENSION (Dimension adjustment)**
= CENTER WIDTH (Center width adjustment)**
~ CENTER IMAGE (Center image adjustment - Neo:6 Music
mode only)
! DUAL MONO (Dual Mono selection - Dolby Digital mode only)
* The adjustment is only temporary for the current input selection.
The value will return automatically to the original setup value when
the power is turned on/off.
** Pro Logic IIx Music and Pro Logic II Music mode only.
• If you have selected "SB NML/THXx1" or "SB LARGEx1", "SBR"
and "SBL" are not appeared but "SB" is appeared on the Display.
3 Use the MULTI CONTROL knob or MULTI %/fi keys to adjust the
setting as desired.
• The adjustment item is displayed for approximately 20 seconds.
4 Press the SOUND key again to return to the input indication.
36 EN
MULTI CONTROL
LISTEN MODE
SOUND
SLEEP
STEREO
¢
Midnight mode (Dolby Digital and DTS mode only)
When watching movies at night , you might not be able to raise the
volume as loud as normal. Midnight mode compresses the dynamic
range of previously specified heavy sound passage of the Dolby Digital
and DTS sound track (like scenes with sudden increases in volume) to
minimize the difference in volume between the scenes with heavy
sound passage and scenes with normal sound passage. This makes it
easy to hear all of the sound track, even when listening at low volumes.
1 Press the SOUND key, then press the 5 5 5 5 5 /∞ ∞ ∞ ∞ ∞ keys or MULTI @/#
keys until "MIDNIGHT" appears on the display.
• This can be selected only if CD/DVD, DVD/6CH, VIDEO 2 or VIDEO 3
is selected as the source and the listen mode is set to "DOLBY
DIGITAL" or "DTS".
2 Use the MULTI CONTROL knob or MULTI %/fi keys to select
the ON or OFF setting.
SP MUTE
AUTO DETECT DIGITAL
A B CLIP
L C R
LFE
SL S SB SR
• The adjustment item is displayed for approximately 20 seconds.
• Some Dolby Digital or DTS software may not be compatible with the
Midnight mode.
3 Press the SOUND key again to return to the input indication.
Panorama mode (Pro Logic II x Music and Pro Logic II Music
mode only)
When listening to music, you will be able to enjoy the "wraparound"
sound effect when you adjust the panorama mode.
1 Press the SOUND key, then press the 5 5 5 5 5 /∞ ∞ ∞ ∞ ∞ keys or MULTI @/#
keys until "PANORAMA" appears on the display.
2 Use the MULTI CONTROL knob or MULTI %/fi keys to select
PANORAMA ON or OFF.
1 PANORAMA ON : PANORAMA mode is ON.
2 PANORAMA OFF : PANORAMA mode is OFF.
SP MUTE
AUTO DETECT
A B CLIP
L R
LFE
S SB
3 Press the SOUND key again to return to the input indication.
DOLBY DIGITAL STEREO
STEREO
DOLBY PL II x