Description Of Appliances - Bartscher 700 Series Instructions For Installation, Use And Maintenance Manual

DESCRIPTION OF APPLIANCES

Gas Bratt Pan
Sturdy structure of stainless steel on four feet which make it possible to regulate the height. The
outside finishing is of stainless steel.
The cooking vat is provided with a thermostatic safety gas tap which enables the regulation of the
temperature in a range from 90°C to 300°C inclusive. Safety is ensured by means of a thermocouple
which is kept active by the flame of the pilot burner.
The cooking vat is made of stainless steel; it is characterized by a manual or motorized tilting system,
depending on the appliance version. Heating is achieved by means of stainless steel tubular burners,
suitable for proper functioning at the high temperatures to which they are exposed.
REGULATIONS AND SUBSTITUTIONS FOR USING A GAS DIFFERENT
FROM THE TYPE PROVIDED FOR
Functioning with a gas type different from the type provided for
In order to change to another gas type, it is necessary to substitute the nozzles of the main burners
and of the pilot burner, following the instructions in the following paragraphs. The nozzle type to be
installed can be found in tables BURNER FEATURES. The nozzles of the main burner, marked with
their diameter in hundredths, and the nozzles of the pilot burner, marked with a number, are to be
found in a transparent packet attached to the instruction booklet. If not included in the equipment,
nozzles must be requested directly to the manufacturer. In the event that the nozzles are replaced, the
responsibility for the functioning of the appliance lies entirely with the person who carried out the
operation.
When the conversion is completed, check that the pipe joints are tight and that the ignition and
functioning of both the pilot and the main burner – both at minimum and maximum – are correct. It
may be advisable to check the output power.
Then, modify the technical sheet and place the sheet (provided as standard kit equipment) referring
to the new gas type in the X position.
Substituting the burner nozzle
199/208