Removing The Engine Guard; Installing The Engine Guard - KTM 450 SX-F FACTORY EDITION Owner's Manual

11 SERVICE WORK ON THE CHASSIS
11.7
11.8
50

Removing the engine guard

F03768-10

Installing the engine guard

F03768-11
–
1
Remove screws with the bushings.
–
2
Remove screws . Take off the engine guard.
–
Position the engine guard on the frame.
–
1
Mount screws , but do not tighten yet.
Guideline
Remaining screws,
chassis
–
2
Mount screws with bushings, but do not tighten yet.
Guideline
Remaining screws,
chassis
The engine guard is directed evenly toward the front.
–
Tighten all the screws of the engine guard.
Guideline
Remaining screws,
chassis
M6 10 Nm (7.4 lbf ft)
M6 10 Nm (7.4 lbf ft)
M6 10 Nm (7.4 lbf ft)