Removing The Lower Triple Clamp - KTM 450 SX-F FACTORY EDITION Owner's Manual

11 SERVICE WORK ON THE CHASSIS
11.11
52
F03657-11

Removing the lower triple clamp

F03659-10
F03660-10
–
Position the brake caliper. Mount and tighten screws
Guideline
Screw, front M8
brake caliper
–
Position the brake line and the clamp. Mount and tighten
5
screws .
Finishing work
–
Install the front wheel.
Preparatory work
–
Raise the motorcycle with a lift stand. (
–
Remove the front wheel.
–
Remove the fork legs. (
–
Remove the start number plate. (
–
Remove front fender. (
–
Take off the handlebar cushion.
Main work
–
1
Remove screw . Detach the wiring harness.
–
2
Remove screw .
–
3
Remove screw .
–
Take off the upper triple clamp with the handlebar and place
to one side.
Info
Cover the components to protect them against damage.
Do not kink the cables and lines.
–
Remove the steering head seal
–
Remove the lower triple clamp and steering stem.
–
Remove the upper steering head bearing.
4
25 Nm (18.4 lbf ft)
Loctite
( p. 94)
p. 47)
( p. 93)
p. 51)
p. 56)
p. 57)
4
.
.
® 243™