Removing The Seat - KTM 450 SX-F FACTORY EDITION Owner's Manual

11.22

Removing the seat

Caution
Danger of burns The voltage regulator gets very hot when the vehicle is driven.
–
Allow the voltage regulator to cool down before performing any work.
–
Position the left frame protector.
–
Insert the right frame protector from below and push it to the
rear.
–
Mount and tighten screws
Guideline
Screw, frame protec-
tor
–
Mount the new cable ties.
H05029-11
Finishing work
–
Check the free travel of the foot brake lever. (
–
Remove the motorcycle from the lift stand. (
–
Install the main silencer. (
–
Remove screw
H05035-10
–
Raise seat, pull it toward the fuel tank and lift it off.
H05036-10
SERVICE WORK ON THE CHASSIS 11
8
with the washers.
M5 3 Nm (2.2 lbf ft)
p. 67)
1
.
p. 87)
p. 47)
61