Cleaning The Dust Boots Of The Fork Legs - KTM 450 SX-F FACTORY EDITION Owner's Manual

11 SERVICE WORK ON THE CHASSIS
11.4
48
F03665-10

Cleaning the dust boots of the fork legs

F03666-10
Main work
–
1
Release bleeder screws
Any excess pressure escapes from the interior of the fork.
–
Tighten the bleeder screws.
Finishing work
–
Remove the motorcycle from the lift stand. (
Preparatory work
–
Raise the motorcycle with a lift stand. (
–
Remove the front wheel.
–
Remove the fork protector. (
Main work
–
1
Push dust boots of both fork legs downward.
Info
The dust boots remove dust and coarse dirt particles
from the inside fork tubes. Over time, dirt can accumu-
late behind the dust boots. If this dirt is not removed,
the oil seals behind can start to leak.
Warning
Danger of accidents Oil or grease on the brake discs
reduces the braking effect.
–
Always keep the brake discs free of oil and grease.
–
Clean the brake discs with brake cleaner when nec-
essary.
–
Clean and oil the dust boots and inner fork tubes of both fork
legs.
Universal oil spray ( p. 141)
–
Press the dust boots back into their installation position.
–
Remove excess oil.
Finishing work
–
Install the fork protector. (
–
Install the front wheel.
–
Remove the motorcycle from the lift stand. (
.
p. 47)
p. 47)
( p. 93)
p. 49)
p. 49)
( p. 94)
p. 47)