Removing The Engine Guard; Installing The Engine Guard - KTM 690 ENDURO USA 2008 Owner's Manual

MAINTENANCE WORK ON CHASSIS AND ENGINE

Removing the engine guard

9.74

Installing the engine guard

9.75
–
Stand the motorcycle on its side stand on a horizontal surface.
–
Remove screws
–
Pull the engine guard forward out of the holders and set it down.
100198-10
–
Slide the engine guard into holders
–
Position the engine guard. Mount and tighten screws.
Guideline
Remaining screws, chassis
100199-10
on the left and right.

at the rear.

M6 10 Nm (7.4 lbf ft)
139