Idle Speed Adjusting Screw; Shift Lever - KTM 450 SX-F FACTORY EDITION Owner's Manual

6 CONTROLS
6.12
6.13
18

Idle speed adjusting screw

H05058-10

Shift lever

401950-10
401950-13
The idle setting of the throttle valve body substantially influences
the vehicle's starting behavior, a stable idle speed, and the vehi-
cle's response when the throttle is opened.
An engine with a correctly set idle speed is easier to start than an
engine with the idle speed set incorrectly.
The idle speed is adjusted using the idle speed adjusting
1
screw .
Increase the idle speed by turning the idle speed adjusting screw
clockwise.
Decrease the idle speed by turning the idle speed adjusting screw
counterclockwise.
1
Shift lever is mounted on the left of the engine.
The gear positions can be seen in the figure.
The neutral or idle position is between the first and second gears.