Checking The Front Brake Linings; Changing The Brake Linings Of The Front Brake - KTM 450 SX-F FACTORY EDITION Owner's Manual

12 BRAKE SYSTEM
12.6
12.7
84
F03694-10

Checking the front brake linings

Warning
Danger of accidents Worn-out brake linings reduce the braking effect.
–
Ensure that worn-out brake linings are replaced immediately. (Your authorized KTM workshop will be
glad to help.)
F03691-10

Changing the brake linings of the front brake

Warning
Danger of accidents Incorrect servicing will cause the brake system to fail.
–
Ensure that service work and repairs are performed professionally. (Your authorized KTM workshop
will be glad to help.)
Main work
–
Move the brake fluid reservoir mounted on the handlebar to a
horizontal position.
–
1
Remove screws .
–
2
Take off cover with membrane
–
A
Add brake fluid to level
Guideline
A
Level (brake fluid level
below reservoir rim)
Brake fluid DOT 4 / DOT 5.1 (
–
2
Position cover with membrane
1
screws .
Info
Use water to immediately clean up any brake fluid that
has overflowed or spilled.
–
Check the brake linings for minimum thickness
A
Minimum thickness
» If the minimum thickness is less than specified:
–
Change the brake linings of the front brake.
( p. 84)
–
Check the brake linings for damage and cracking.
» If damage or wear is encountered:
–
Change the brake linings of the front brake.
( p. 84)
3
.
.
5 mm (0.2 in)
p. 138)
3
. Mount and tighten
A
.
≥ 1 mm (≥ 0.04 in)