7.5
Replacing the switch
lever (loop handle)
7.5.1
Removing the switch
lever (loop handle)
– Open the housing, b 6.1.
1
: Remove the switch rod (1).
: Use service tool to lift the switch
lever (2) out of the gear housing.
54
7.5.2
Installing the switch lever
(loop handle)
2
: Fit the switch rod (1).
– Close the housing, b 6.2.
7.6
7.6.1
– Open the housing, b 6.1.
– Open the rear handle, b 6.4.1.
1
2
: Remove the front switch lever (1).
: Pull the slide (1) back and hold it
in that position.
Replacing the slide
Removing the slide
1
1
HSE 61, HSE 71, HSE 81