Installing The Housing - Stihl HSE 61 Manual

6.5.2

Installing the housing

2
1
: Install the power cord (1) with
terminal block (2).
1
: Fit the push nuts (1).
HSE 61, HSE 71, HSE 81
: Before fitting the gear housing
with its components, push the
blue wire (1) into the two slots (2)
and make sure it is secure.
1
: Place the gear housing (1) with
its components in the motor
housing (2).
– Assemble the rear handle,
b 6.4.3.
– Close the rear handle, b 6.4.4.
– Install the drive gear, b 5.1.5.
1
– Close the housing, b 6.2.
2
2
1
2
43