Mounting The Control Unit - Stihl HSE 61 Manual

7.2.4

Mounting the control unit

1
: Secure the control unit (1) to the
gear housing with screws (2)
(1.5 Nm).
1
: With the rod (2) upright, fit the
microswitch (1) in the control unit.
50
2
2
: Swing the rod (1) down.
2
1
2
: Connect terminal socket of blue
wire (1) to the switch and push
the wire into the slot (2).
(
1
: Connect the blue wire (1) to the
microswitch.
1
2
: Connect terminal socket of black
wire (1) to the switch and push
the wire into the slot (2).
HSE 61, HSE 71, HSE 81
1