Stihl HSE 61 Instruction Manual

Stihl HSE 61 Instruction Manual

Hide thumbs Also See for HSE 61:

Advertisement

Quick Links

STIHL HSE 61, 71, 81
Instruction Manual

Advertisement

Table of Contents
loading

Summary of Contents for Stihl HSE 61

  • Page 1 STIHL HSE 61, 71, 81 Instruction Manual...
  • Page 3: Table Of Contents

    EC Declaration of Conformity Dr. Nikolas Stihl UKCA Declaration of Conformity General Power Tool Safety Warnings This instruction manual is protected by copyright. All rights reserved, especially the rights to reproduce, translate and process with electronic systems. HSE 61, HSE 71, HSE 81...
  • Page 4: Guide To Using This Manual

    Ensure that the Never jerk the power cord to disconnect machine cannot be used without it from the wall outlet. To unplug, grasp authorization. the plug, not the cord. HSE 61, HSE 71, HSE 81...
  • Page 5 Only use cutting blades and accessories Wear sturdy shoes with that are explicitly approved for this non-slip soles. power tool by STIHL or are technically identical. If you have any questions in this respect, consult your dealer. Use only high quality parts and accessories.
  • Page 6 Right hand on the control handle and left in the rain or in wet or hand on the loop handle. very damp locations. HSE 61, HSE 71, HSE 81...
  • Page 7 Work calmly and carefully – in daylight unattended: Switch it off and disconnect attempting to free the conditions and only when visibility is the plug from the power supply. blades. good. Proceed with caution, do not put others in danger. HSE 61, HSE 71, HSE 81...
  • Page 8 STIHL recommends that you have No general recommendation can be servicing and repair work carried out given for the length of usage because it exclusively by an authorized STIHL depends on several factors. servicing dealer. STIHL dealers are HSE 61, HSE 71, HSE 81...
  • Page 9: Using The Unit

    Do not throw cuttings into the garbage can – they can be composted. If the hedge is wide, cut it in several passes – one hand on the front switch lever – one hand on the control handle. HSE 61, HSE 71, HSE 81...
  • Page 10: Connecting To Power Supply

    Up to 20 m 1.5 mm 20 m to 50 m 2.5 mm 100 V – 127 V: Up to 10 m AWG 14 / 2.0 mm 10 m to 30 m AWG 12 / 3.5 mm HSE 61, HSE 71, HSE 81...
  • Page 11: Switching On

    (3) and hold them in that position. The machine is designed for two-hand operation, i.e. it will run only when the operator’s hands are on the switch lever (1) and trigger switch (3). HSE 61, HSE 71, HSE 81...
  • Page 12: Switching Off

    (3) is depressed. Secure it against unauthorized use. Release the trigger switch (1) and auxiliary switch (3). HSE 61, 71 The blades are covered by the blade guard in the idle position. HSE 61, HSE 71, HSE 81...
  • Page 13: Storing The Machine

    STIHL resin solvent. NOTICE Do not operate your machine with dull or damaged cutting blades. This may cause overload and will give unsatisfactory cutting results. HSE 61, HSE 71, HSE 81...
  • Page 14: Maintenance And Care

    100 hours of operation Carbon brushes Have replaced by servicing dealer Accessible screws, nuts and bolts Tighten Safety information label replace STIHL recommends STIHL dealers Afterwards spray the blades with STIHL resin solvent HSE 61, HSE 71, HSE 81...
  • Page 15: Minimize Wear And Avoid Damage

    If these maintenance operations cannot be performed by the owner, they should be performed by a servicing dealer. STIHL recommends that you have servicing and repair work carried out exclusively by an authorized STIHL HSE 61, HSE 71, HSE 81...
  • Page 16: Main Parts

    Handle lock Trigger Switch lever 11, 12 Loop handle 10 Hand guard 11 Cutting blades (HSE 61, 71) – see "Specifications" 12 Cutting blades (HSE 81) – see "Specifications" 13 Blade scabbard 14 Blade guard (HSE 81 only) 15 Tip guard...
  • Page 17: Specifications

    Sound power level L to EN 60745-2-15 500 mm blade 4.8 kg HSE 61 700 mm blade: 4.2 kg 500 mm blade: 96 dB(A) 700 mm blade 4.9 kg 600 mm blade: 96 dB(A) HSE 61, HSE 71, HSE 81...
  • Page 18 Right handle: 2.1 m/s REACH is an EC regulation and stands for the Registration, Evaluation, HSE 81 Authorisation and Restriction of 600 mm blade: Chemical substances. Left handle: 3.5 m/s Right handle: 2.5 m/s HSE 61, HSE 71, HSE 81...
  • Page 19: Maintenance And Repairs

    Serial identification replacement parts which have been accessories and packaging to an number: 4812 approved by STIHL for this power tool or approved disposal site for environment- are technically identical. Only use high- friendly recycling. conforms to the relevant provisions of...
  • Page 20: Ukca Declaration Of Conformity

    The measured and the guaranteed sound power level have been determined in accordance with UK regulation Noise Emission in the Environment by Equipment for use Outdoors Regulations 2001, Anhang 8, using the ISO 11094 standard. HSE 61, HSE 71, HSE 81...
  • Page 21: General Power Tool Safety Warnings

    EN 60745 European HSE 71 standard for hand-held motor-operated 600 mm blade: 99 dB(A) electric tools. STIHL is required by law to 700 mm blade: 99 dB(A) print these standardized texts verbatim. The safety precautions and warnings on HSE 81 Dr.
  • Page 22 Do not expose power tools to rain or hat, or hearing protection used for wet conditions. Water entering a appropriate conditions will reduce power tool will increase the risk of personal injuries. electric shock. HSE 61, HSE 71, HSE 81...
  • Page 23 When transporting or storing the hedge trimmer always fit the blade scabbard. Proper handling of the hedge trimmer will reduce possible personal injury from the cutting blades. HSE 61, HSE 71, HSE 81...
  • Page 24 0458-279-0121-D englisch www.stihl.com *04582790121D* 0458-279-0121-D...

This manual is also suitable for:

Hse 71Hse 81

Table of Contents