Lubrication - Stihl HSE 61 Manual

8.6

Lubrication

Lubricating the cutting attachment:
The cutting attachment should be oiled as and when needed. The whole cutting attachment should be sprayed so
that it is covered in a thin film of oil.
See table below for type of oil.
Lubricating the gearbox:
The gearbox should be re-lubricated every time it is serviced. The specified quantity of lubricating grease is 20g.
The type of lubricant and the points of lubrication are shown in the table and illustration.
Description
Lubricating grease
Lubricating grease
STIHL Multispray
STIHL multipurpose
grease
HSE 61, HSE 71, HSE 81
Type of lubricant/Part No.
M 178/02 Klüberlub BE 71-501
M 178/02 Klüberlub BE 71-501
0730 411 7000
0781 120 1109
A/B A/B
Point of lubrication
Drive gear/connecting
rod
Drive gear/connecting
rod
Cutting attachment
Handle moldings
B
A/B
A/B
A/B A/B
Letter Model
in illustration
A HSE 61
B HSE 71
HSE 81
-
-
61