Replacing The Quadrant; Removing The Quadrant; Installing The Quadrant - Stihl HSE 61 Manual

6.6

Replacing the quadrant

6.6.1

Removing the quadrant

– Open the housing, b 6.1.
1
: Pull the slide (1) back and hold it
in that position.
1
: Rotate the quadrant (1) in
direction of arrow and remove it
from the housing.
44
1
: Release the slide (1).
6.6.2

Installing the quadrant

1
– Pull the connecting wires out of
the slot.
: Pull the slide (1) back and hold it
in that position.
1
: Place the quadrant (1) in the
housing (note position of notch).
1
: Rotate the quadrant (1) to the
correct position so that it snaps
into place.
HSE 61, HSE 71, HSE 81