Lubricating The Gearbox; Replacing The Starter Rope And Rewind Spring - Stihl FS 80 Instruction Manual

English
On all spark plugs:
: Always press the boot (2) firmly on
to the spark plug (3).
38
Lubricating the
Gearbox
1
2
: Check grease level regularly –
about every 25 hours of operation.
: Unscrew the filler plug (1).
: If no grease can be seen on the
3
inside of the filler plug, screw the
tube (2) of STIHL gear lubricant for
brushcutters – see "Special
Accessories" – into the filler hole.
: Squeeze up to 5 g grease into the
gear housing.
Do not completely fill the gear
housing with grease.
: Refit the filler plug and tighten it
down firmly.
Replacing the Starter Rope
and Rewind Spring
2
Removing the Starter Cover
:
:
1
4
2
1 1
3
Take out the screws (1).
Lift the starter cover (2) away from
the tank (3) and pull it out from
under the shroud (4).
FS 80, FS 80 R, FS 85, FS 85 R