Stopping The Engine - ABB Power2 850-M Operation Manual

Operation Manual / Power2 850-M / Low-pressure stage
6 Operation and service / 6.4 Stopping the engine
6.4

Stopping the engine

CAUTION
Residual heat in the low-pressure and high-pressure stage
If the residual heat in the low-pressure and high-pressure stage is not suffi-
ciently dissipated by the circulating lubricating oil, machine damage could
occur.
Observe the post-lubrication times and the oil pressure specified for
u
post-lubrication (see chapter Monitoring during operation / Lubricating
oil pressure).
© Copyright 2022 ABB. All rights reserved. HZTL4062_EN Rev.E March 2022