Removing The Compressor Casing; Fig. 30: Removing The Compressor Casing 1; Fig. 31: Removing The Compressor Casing 2 - ABB Power2 850-M Operation Manual

Operation Manual / Power2 850-M / Low-pressure stage
9 Disassembly and assembly / 9.8 Removing the compressor casing
9.8

Removing the compressor casing

Fig. 30: Removing the compressor casing 1
1. Loosen two studs (72002) and screw (72021) in the upper area.
2. Fit bracket (90030) with four screws (90959).
3. Fit four plates (90031) and secure with plate (90032), screw (90656) and nut (90432).
Fig. 31: Removing the compressor casing 2
4. Secure lifting gear to swivel lifting eye (90231) and secure compressor casing (72000) to
crane.
5. Loosen and remove nuts (61037).
6. Press off compressor casing (72000) with three press-off screws (90924).
7. Move out compressor casing (72000) and put down.
© Copyright 2022 ABB. All rights reserved. HZTL4062_EN Rev.E March 2022