Stopping The Engine - ABB HT588474 Operation Manual

Operation Manual / 4 Product description / TPS44-H.. - TPS52-H..
6 Stopping the engine / ​
6

Stopping the engine

Water-cooled turbocharger variant
Post-lubricate as long as the rotor is turning.
u
Observe the oil pressure while performing post-lubrication: 0.5 < p
u
Switch off post-lubrication as soon as the rotor is stationary or after no more than two
u
minutes.
Deviating procedures must be coordinated with ABB Turbo Systems.
CAUTION
Water cooling after stopping the engine
If the heat in the turbocharger is not dissipated after the engine stops, dam-
age may result.
Allow the water cooling of the turbocharger to continue operating for 15
u
to 20 minutes after stopping the engine.
© Copyright 2017 ABB. All rights reserved. HZTL4037_EN
≤1.0.
oil
Revision E July 2017