Fig. 17: Setting Dimension X - ABB Power2 850-M Operation Manual

Operation Manual / Power2 850-M / Low-pressure stage
5 Monitoring during operation / 5.3 Speed measurement
Installing the speed measurement system
Fig. 17: Setting dimension X
1. Set speed sensor (86505) in the plate (86507) to dimension X.
2. Secure speed sensor with wedge lock washer (86509) and clamping nut (86505). Observe
tightening torque.
© Copyright 2022 ABB. All rights reserved. HZTL4062_EN Rev.E March 2022