Removing The Air Suction Branch; Fig. 25: Removing The Air Suction Branch - ABB Power2 850-M Operation Manual

Operation Manual / Power2 850-M / Low-pressure stage
9 Disassembly and assembly / 9.5 Removing the air suction branch
9.5

Removing the air suction branch

Disconnect air line according to the instructions of the enginebuilder.
u
Dismantle insulation as far as necessary.
u
If present: Disconnect supply line for compressor cleaning from air suction branch.
u
Fig. 25: Removing the air suction branch
1. Loop around air suction branch (82000) with lifting gear.
2. Loosen and remove nuts (72004). Remove washers (72003).
3. Remove and put down the air suction branch.
© Copyright 2022 ABB. All rights reserved. HZTL4062_EN Rev.E March 2022