Table of Contents
Advertisement
Help Guide
Data Projector
VPL-GTZ380
Menu Operation: Dynamic Range
You can set the image input level for the HDMI 1/HDMI 2 terminal.
Press the MENU button.
1
Select
[Function] - [Dynamic Range] - the desired setting.
2
Settings
[Auto]
The image input level is identified automatically.
[Limited]
Select this when the image input level is equivalent to levels between 16 and 235.
[Full]
Select this when the image input level is equivalent to levels between 0 and 255.
Note
If the image output setting of the connected HDMI device is not configured correctly, light and dark areas of the image may
appear too light or too dark.
5-023-481-14(1) Copyright 2020 Sony Corporation
90
Advertisement
Table of Contents
