Table of Contents
Advertisement
Help Guide
Data Projector
VPL-GTZ380
Operation With the Remote Control RM-PJ24
This help guide explains the operations using the remote control RM-PJ29.
If you are using the remote control RM-PJ24, some operations are different. For the differences, see the table below.
Operation
Confirmation
Press the ENTER button.
Power On
Press the
Power Off
Press the
Press the INPUT button repeatedly, or press the A
Input selection
to E button.
Menu Operation:
Set from the menu.
Calib. Preset
Menu Operation:
Set from the menu or by pressing the LIGHT
Laser Light
OUTPUT button.
Setting
Menu Operation:
Set from the menu.
Color Temp.
Menu Operation:
Set from the menu.
Sharpness
Menu Operation:
Gamma
Set from the menu.
Correction
Menu Operation:
Set from the menu.
Color Space
Menu Operation:
Set from the menu.
Aspect
Menu Operation:
Set from the menu.
3D Settings
Select from [All]/[1]/[2]/[3]/[4] according to the
Menu Operation:
setting of the ID MODE switch on the remote
ID Mode
control.
Related Topic
Parts and Controls (Remote Control) (RM-PJ24)
Installing the Projector
Projecting Images
Menu Operation: Calib. Preset
RM-PJ29
(On) button.
(Standby) button.
Press the
Press the
Press the
Press the INPUT button repeatedly.
Set from the menu or by pressing the
CALIBRATED PRESET button.
Set from the menu.
Set from the menu or by pressing the
COLOR TEMP button.
Set from the menu or by pressing the
SHARPNESS button.
Set from the menu or by pressing the
GAMMA CORRECTION button.
Set from the menu or by pressing the
COLOR SPACE button.
Set from the menu or by pressing the
ASPECT button.
Set from the menu or by pressing the 3D
button.
Set to [All] or [1], as the remote control has
no ID MODE switch and the ID is fixed to [1].
26
RM-PJ24
(Enter) button.
/
(On/Standby) button.
/
(On/Standby) button twice.
Advertisement
Table of Contents
